ELUTENG M2 NVME Carcasa USB 3.0 Max 5Gbps para PCIE NVMe SSD M Key a USB externa SSD Enclosure Compatible con Samsung 960 970 EVO PRO WD Negro NVME HDD a USB Adaptador

***** CONDICIONES PARA LA VENTA *****
1.- Tiempo de entrega de 3 a 5 días Hábiles.
2.- Enviamos su compra a cualquier parte del país.
.
.
***** TITULO COMPLETO *****
.
ELUTENG M2 NVME Carcasa USB 3.0 Max 5Gbps para PCIE NVMe SSD M Key a USB externa SSD Enclosure Compatible con Samsung 960 970 EVO PRO WD Negro NVME HDD a USB Adaptador.
***** DESCRIPCIÓN DEL PRODUCTO *****
.
Esto se ajusta a tu . Asegúrate de que esto coincide al ingresar tu número de modelo. Both SSD Heatsinks are available for the M.2 2280 SSD. Including a screw fixing heat sink, rubber band fixing heat sink, screws, rubber ring and thermal silicone pad. Compatible with Samsung 850 EVO SSD and more. [Double-Sided Quick Cooling] Groove design M.2 2280 heatsink, greatly increase the heat dissipation area, with 10°C - 25°C cooling effect (Varies depending on the environments), cooling the M.2 SSD to a safe temperature quickly and improving the performance of your computer. [Phase Change Thermal Conductivity Technology] The use of high-coefficient phase change thermal silicon wafers greatly improves thermal conductivity. Long-term use of phase change materials, thermal conductivity will be better. [Durable] Alloy aluminum oxidation greatly improves the corrosion resistance, hardness, wear resistance, insulation, heat resistance of the NGFF NVME cooler, and prolongs the service life. [Easy to install] Make precise and close fitting, easy to install, and not damage the hard disk. . null . Descripción del producto Installation Steps 1.Fixing the heat sink with screws Step 1: Clean the sides of the M.2 SSD with a wet wipe and dry with a dry towel. Step 2: Place a silicone pad (0.5 mm pink) on the aluminum back cover. Make sure there is no semi-circular space covered. Step 3: Place the M.2 SSD on a thermal silicone pad. Make sure to align the semi-circular space of the aluminum back cover. Step 4: Remove the double-sided protective film of the light blue thermal silica gel pad. Step 5: Place a silicone pad (1mm blue) on the front and try to place it in the middle of the M.2 SSD, gently press it with your finger. Step 6: Place the heat sink on the silicone pad and align the screw holes. Step 7: Fix the heat sink to the back cover with 6 screws. Warning: Do not allow the heat sink to touch the metal end of the M.2 SSD during installation, as this may cause a short circuit. 2. Fixing the SSD cooler with screws Step 1: Clean the side of the M.2 SSD with a wet wipe (bag, No. 1) and dry it with a dry towel (bag, No. 2). Step 2: Remove the double-sided protective film of the light blue thermal silica gel pad. Step 3: Place a silicone pad (1mm blue) on the front and try to place it in the middle of the M.2 SSD, gently press it with your finger. Step 4: Place the heat sink on the silicone pad and align the screw holes. Step 5: Fix the ends of the heat sink with 2 rubber bands. Specification Support equipment: m.2 solid state drive Thermal conductivity: 2.0W m·K Size: Screw fixing ssd heat sink: 7.7cm*2.2cm*0.6cm Heat-resistant rubber ssd heat sink: 7cm*2.2cm*0.3cm Material: Alumina Colour: Black Package Contents Screw fixing ssd heat sink x 1 Rubber ring fixing ssd heat sink x 1 Thermal silicone pad x 4 Heat resistant rubber band x 2 Cleaning kit x 1 . Información de producto Dimensiones del paquete 7.3 x 3.2 x 0.4 pulgadas Peso del producto 0.64 onzas Peso del envío 0.64 onzas (Ver tarifas y políticas de envío) Fabricante ELUTENG ASIN B07PS9S2DZ Opinión media de los clientes 4.9 de 5 estrellas 10 calificaciones 4.9 de 5 estrellas Clasificación en los más vendidos de nº109 en Disipadores Fecha de disponibilidad en marzo 17, 2019 Comentarios Si vendes este producto, ¿te gustaría sugerir actualizaciones mediante el soporte al vendedor? ¿Quieres informarnos sobre un precio más bajo? . Installation Steps 1.Fixing the heat sink with screws Step 1: Clean the sides of the M.2 SSD with a wet wipe and dry with a dry towel. Step 2: Place a silicone pad (0.5 mm pink) on the aluminum back cover. Make sure there is no semi-circular space covered. Step 3: Place the M.2 SSD on a thermal silicone pad. Make sure to align the semi-circular space of the aluminum back cover. Step 4: Remove the double-sided protective film of the light blue thermal silica gel pad. Step 5: Place a silicone pad (1mm blue) on the front and try to place it in the middle of the M.2 SSD, gently press it with your finger. Step 6: Place the heat sink on the silicone pad and align the screw holes. Step 7: Fix the heat sink to the back cover with 6 screws. Warning: Do not allow the heat sink to touch the metal end of the M.2 SSD during installation, as this may cause a short circuit. 2. Fixing the SSD cooler with screws Step 1: Clean the side of the M.2 SSD with a wet wipe (bag, No. 1) and dry it with a dry towel (bag, No. 2). Step 2: Remove the double-sided protective film of the light blue thermal silica gel pad. Step 3: Place a silicone pad (1mm blue) on the front and try to place it in the middle of the M.2 SSD, gently press it with your finger. Step 4: Place the heat sink on the silicone pad and align the screw holes. Step 5: Fix the ends of the heat sink with 2 rubber bands. Specification Support equipment: m.2 solid state drive Thermal conductivity: 2.0W m·K Size: Screw fixing ssd heat sink: 7.7cm*2.2cm*0.6cm Heat-resistant rubber ssd heat sink: 7cm*2.2cm*0.3cm Material: Alumina Colour: Black Package Contents Screw fixing ssd heat sink x 1 Rubber ring fixing ssd heat sink x 1 Thermal silicone pad x 4 Heat resistant rubber band x 2 Cleaning kit x 1