TRIPP LITE DisplayPort 4 adaptador de cable 500 VA
- Product Code: 1569394595-2291
- Availability: In Stock
-
$ 9,340,000.00
***** CONDICIONES PARA LA VENTA *****
1.- Tiempo de entrega de 3 a 5 días Hábiles.
2.- Enviamos su compra a cualquier parte del país.
.
.
***** TITULO COMPLETO *****
.
TRIPP LITE DisplayPort 4 adaptador de cable 500 VA.
***** DESCRIPCIÓN DEL PRODUCTO *****
.
500VA line-interactive 1U rack tower UPS. Installed depth of only 11.8 inches. USB, RS232, EPO and optional SNMP card 7 NEMA 5-15R outlets 6 UPS & 1 surge-only, 1 outlet is individually controllable for load shedding Supports Watchdog application, OS and hard-reboot restart options for remote applications Included PowerAlert software for complete network power management and control Advanced Automatic Voltage Regulation AVR corrects brownouts without draining battery Runtimes of 14.6 minutes at half load 250VA 150 watts and 3.2 minutes at full load(500VA 300 watts) 2-Year Warranty (3-Year with registration) & 250,000 Ultimate Lifetime Insurance for connected equipment . Más información del producto Ampliar Leer más Ampliar Key Specifications: Model: SMART500RT1U Load Capacity: 500 VA (300 W) Nominal AC Input: 120V, 60 Hz Nominal AC Output: 120V, 60 Hz AC Outlets: 7 x 5-15R Switched Outlet Banks: One switchable single-outlet 5-15R load bank Output Waveform (AC Mode): Sine Wave Output Waveform (Battery Mode): PWM Sine Wave Input Cord: 10 ft. (3 m) Cord with 5-15P Plug Half-Load Runtime: 14.6 min. (150 W Load) SmartPro Line-Interactive Rack Tower UPS with Network Slot This line-interactive UPS system protects your critical network systems from damage, downtime and data loss. Sine wave output improves compatibility with sensitive equipment Battery backup powers critical systems during outages Advanced AVR corrects power sags (brownouts) and overvoltages Surge protection blocks harmful transient voltages LED indicators signal power, voltage correction, load level and battery charge state Pre-installed network card provides Java- , HTML5-based remote management USB and serial ports connect to computers for power management Leer más Ampliar Ampliar Ampliar Ampliar Power Protection and Battery Backup Between severe weather, the aging electrical grid and unavoidable hazards lurking inside your own walls, your servers and network hardware are under constant attack from power problems. Even a brief loss of power or a momentary surge can damage your equipment, corrupt your data, bring down your network and hurt your bottom line. Prevent damage, downtime and data loss by installing this SmartPro UPS system. It conditions incoming AC power to protect your equipment, provides enough battery backup to outlast most outages and allows critical systems to shut down gracefully to prevent data loss and corruption during extended blackouts. Common Applications Protect Servers and Network Hardware: Application Servers, Storage Servers, Database Servers, File Servers, Virtualization Servers, Proxy Servers, Servers, Media Servers, VoIP Servers, Network-Attached Storage, Network Switches, PoE Switches, Firewalls, Network Appliances, Bridges, Gateways, Routers. Reliable Battery Backup Half-Load Runtime: This UPS system will support a 50% load (150 W) for up to 14.6 minutes. Hot-Swappable Batteries: The internal batteries can be replaced without turning off the UPS system and disrupting the operation of connected equipment. AVR and Surge Noise Protection In locations with chronic voltage problems, frequent switching to battery drains reserve power and shortens battery life. This UPS system has a feature ed automatic voltage regulation (AVR) that solves the problem. The UPS detects when input voltage is out of bounds and corrects it without using the battery. All Tripp Lite UPS systems also include built-in surge protection and noise filtering to shield your equipment from destructive transient voltages and electromagnetic (EMI RFI) line noise. Leer más Ampliar Ampliar Ampliar Ampliar Flexible Management Options There are several ways to manage this UPS system: 1. Use the front-panel LEDs for convenient local management. 2. Use the USB port with your computer's built-in power management features. 3. Use the USB or serial port with your computer and Tripp Lite's PowerAlert software. 4. Install an optional network card to enable standalone network management via SNMP, , SSH or telnet. LED Control Panel The intuitive multicolor LEDs display a variety of helpful and important information, including power status, voltage regulation status, connected load level, battery charge level and battery condition. Environmentally Responsible Design - High Efficiency: This UPS system saves energy, produces less heat, shrinks your carbon footprint and reduces annual operating costs. - User-Replaceable Battery: This UPS system has a user-replaceable, recyclable battery, allowing it to remain in service instead of going to a landfill. - RoHS Compliance: This UPS system complies with the RoHS (Restriction of Hazardous Substances) Directive, limiting the use of hazardous substances in manufacturing. Service and Support - 3-Year Product Warranty: If this UPS system (including the internal battery) proves defective in material or workmanship within that period, Tripp Lite will repair or replace it at no charge. - 250,000 Insurance: Tripp Lite will repair or replace connected equipment damaged by surges even lightning strikes! - Tech Support: Chicago-based, in-house tech specialists are available by phone, and chat. Leer más Ampliar Why Choose Tripp Lite? Industry Leader - Over 90 Years: Founded in 1922, Tripp Lite has a long-established and proven track record of providing reliable products and responsive customer service. - Trusted Name: From the smallest office to the largest data center, customers worldwide trust Tripp Lite to power, protect, manage and connect valuable IT equipment. - Third-Party Safety Testing and ISO 9001 Certification. Leer más . Descripción del producto Estilo:500 VA Product Description Tripp Lite's SMART500RT1U intelligent, line-interactive rack tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large internal batteries offer 14. 6 minutes half load runtime and 3. 2 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts as low as 90V. 500VA 300 watt power handling capability is compatible with networking, telecom and other sensitive electronic applications. Includes 6 UPS supported outlets with a single outlet load bank that can be individually controlled via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Includes 1 surge-only outlet for peripherals not requiring battery backup. Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Power Alert UPS monitoring and unattended shutdown software is available for download. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency situation. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme. From the Manufacturer Product Description Ideal for Protection of Data Center Network Rackmount Equipment Click here for a larger image Requiring only one rack space (1U) in a standard rack enclosure, Tripp Lite’s SMART500RT1U protects connected equipment against data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Featuring advanced Automatic Voltage Regulation, it provides regulated 120V nominal output without using battery power during brownouts and overvoltages. Large internal batteries support connected equipment during blackouts. The SMART500RT1U has 7 outlets (6 UPS supported, 1 surge only) including 1 outlet that is individually controllable to reboot select equipment on demand or maximize battery runtime for mission-critical equipment. USB and DB9 communication ports support messaging of detailed UPS operational parameters and line power status. Included PowerAlert UPS monitoring and unattended shutdown software provides management support for an unlimited number of network UPS systems. The SMART500RT1U comes with 250,000 Ultimate Lifetime Insurance coverage for connected equipment insurance (USA Canada only) and a 2-year product warranty. Key Features Ideal for Protection of Data Center Network Rackmount Equipment The SMART500RT1U provides advanced Automatic Voltage Regulation, reliable battery backup and comprehensive power management capability in just 1U of rack space. Featuring 7 outlets and USB DB9 ports, the SMART500RT1U offers a complete power protection solution for servers, storage devices and telecom equipment. Advanced Automatic Voltage Regulation (AVR) Advanced AVR protects connected equipment from incremental hardware damage, data loss and performance problems that can be caused by low-voltage conditions, commonly known as brownouts, and overvoltages. The SMART500RT1U corrects brownouts as low as 90V to a nominal 120V, providing safe, computer-grade power to all connected components, without consuming battery power needed to support equipment through blackouts. Runtime Chart for SMART500RT1U Click here for a larger image Reliable Battery Backup UPS battery backup keeps connected equipment operational through short power failures, and provides time to save data and perform an orderly system shutdown in case of a prolonged blackout. The SMART500RT1U features a large internal battery that provides 3 min. of battery support for a full load (300 watts) and 8 min. for a half-load (150 watts). During normal operation, incoming utility power keeps the UPS battery fully charged so that backup power will always be available if needed. Surge Suppression A sudden power surge or spike can damage or destroy electronic components and wipe out irreplaceable data. The SMART500RT1U features a 480-joule surge suppression rating to protect connected components and data from the harmful effects of power surges. EMI RFI Line Noise Filtering Various electrical and radio sources can cause disruptive interference on the AC line. This line noise is a common cause of incremental hardware damage, data corruption and audio video performance problems. The SMART500RT1U incorporates technology that filters out disruptive line noise, preventing it from affecting your equipment. Advanced Automatic Voltage Regulation with USB and DB9 Port in Just 1U of Rack Space Click here for a larger image USB DB9 Ports, SNMP Capability and Included PowerAlert Software The SMART500RT1U features a USB port and a DB9 port (cables included). Used with Tripp Lite’s included PowerAlert software, these communication ports provide comprehensive network power monitoring and control. Capabilities include automatic unattended shutdown, UPS and line power status messaging (on battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity), timed inverter shutoff after unattended shutdown, and UPS output power control for delayed or immediate reboot of connected devices. The SMART500RT1U also accepts an optional SNMP CARD accessory that enables the UPS to operate as a managed device on the network. Controllable Outlet The SMART500RT1U includes one outlet that is individually controllable via a software interface to reboot locked-up equipment or shed nonessential loads to maximize battery backup time for mission-critical equipment. Versatile Installation Options The SMART500RT1U requires only 1U of rack space in a standard 4-post rack enclosure. It can also be installed in a 2-post rack or in an upright tower configuration (mounting accessories included). Ultimate Peace of Mind The SMART500RT1U comes with 250,000 Ultimate Lifetime Insurance coverage for connected equipment (USA Canada only) and a 2-year product warranty. Technical Specifications Tripp Lite SMART500RT1U SmartPro® UPS System Voltage compatibility: 120 VAC Frequency compatibility: 50 60 Hz VA Wattage Capacity: 500 300 Battery runtimes (half full): 8 min. 3 min. Outlet quantity type: 7 x 5-15R (1 individually controllable, 1 surge only) Signal line protection: — Communications ports: 1 x USB; 1 x DB9 SNMP slot Input cord: 10 ft. Input plug: 5-15P Switches LEDs alarms: On off switch Alarm cancel self-test switch 5 LEDs Audible alarm Dimensions (HWD): 1.75 x 17.5 x 11.75 in. (1U RM) Weight: 17.6 lbs. Material of construction: Steel Agency approvals: UL 1778 (US) CSA (Canada) NOM (Mexico) FCC Part 15 Category B (EMI) RoHS Protect, Power, Organize and Control with Tripp Lite Tripp Lite UPS Systems, Power Management Accessories, Power Distribution Units, Rack Enclosures, KVM Switches and Rackmount Consoles are available with a wide range of features and options to meet the needs of any data center or networking application. SMART750RM1U SmartPro® UPS System Advanced Automatic Voltage Regulation and battery backup protection for mission-critical servers, storage devices and telecom equipment. The SMART750RM1U provides 750VA 450W power capacity with 6 outlets arranged in 2 load banks. One USB port and one DB9 port with included cables and PowerAlert monitoring software provide complete power network monitoring and control. The SMART750RM1U supports connected equipment for 24 minutes during power failures at a half load of 225 watts. 250,000 Ultimate Lifetime Insurance (USA Canada only); 2-year product warranty. SNMP CARD For Remote Monitoring and Control Allows any expansion slot-equipped Tripp Lite SmartPro or SmartOnline UPS system to operate as a managed device on the network. The SNMP CARD enables remote monitoring and control of UPS and site electrical conditions using the SNMP network management platform or a browser. It provides remote viewing of site electrical data, UPS status information and self-test logs. The SNMP CARD also supports selective rebooting of locked network equipment without disrupting power to other devices when used with customized load management receptacles available on select Tripp Lite UPS systems. SR25UB SmartRack™ Enclosure Premium 25U rack enclosure with doors and side panels. The SR25UB features locking, removable, reversible front and rear doors; locking, removable side panels keyed alike with doors; 4 interior vertical posts with unthreaded square-hole openings; preinstalled casters and leveling feet; and 3000-lb. stationary 2250-lb. rolling load capacity. The SR25UB ships fully assembled and comes with a 5-year repair replacement warranty. A full range of rackmount accessories is also available. PDUMH15ATNET Power Distribution Unit Switched metered 1U rackmount PDU with integrated automatic transfer switching (ATS). The PDUMH15ATNET provides 15A 120V capacity with 8 NEMA 5-15R outlets; sequential outlet power-on capability to prevent inrush-related equipment interaction on startup, programmable or real-time monitoring and outlet power control via secure network interface, and ATS to provide power from a secondary input source when primary input fails. 2-year product warranty. B020-008-17 Rack Console KVM Switch Controls an entire network in just 1U of rack space. The B020-008-17 combines a keyboard, 17-in. LCD screen, touch pad, numeric keypad, and 8-port KVM switch in a 1U slide-out unit. It is USB or PS 2 compatible with appropriate Tripp Lite KVM cable kits and capable of controlling up to 504 servers by daisy-chaining additional KVMs. B021-000-19 Rackmount Console Provides a complete network control system in just 1U of rack space. The B021-000-19 includes a keyboard, 19-in. LCD screen and touch pad in a 1U slide-out unit, and is compatible with any KVM switch or server equipped with PS 2 connectors. . Información de producto Estilo:500 VA Dimensiones del producto 22 x 15.5 x 4.9 pulgadas Peso del producto 17.64 pounds Peso del envío 19.65 pounds (Ver tarifas y políticas de envío) Fabricante Petra ASIN B0002CUA6K Asesoramiento sobre envío Este artículo debe enviarse por separado de otros artículos en tu pedido. No se aplicarán cargos adicionales por envío. California residents Haz clic aquí para ver la advertencia de la Proposición 65 Click here for Proposition 65 warning Número de modelo del producto SMART500RT1U Pilas 1 12V (Tipo de pila necesaria) Opinión media de los clientes 4.1 de 5 estrellas 45 calificaciones 4.1 de 5 estrellas Clasificación en los más vendidos de Amazon nº54 en Equipo de Alimentación Ininterrumpida (UPS) Fecha de disponibilidad en Amazon septiembre 13, 2007 Especificación técnica Specification Sheet [pdf ] User Manual [pdf ] Warranty [pdf ] Garantía y asistencia For warranty information about this product, please click here [PDF ] Comentarios Si vendes este producto, ¿te gustaría sugerir actualizaciones mediante el soporte al vendedor? ¿Quieres informarnos sobre un precio más bajo? . Estilo:500 VA Product Description Tripp Lite's SMART500RT1U intelligent, line-interactive rack tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large internal batteries offer 14. 6 minutes half load runtime and 3. 2 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts as low as 90V. 500VA 300 watt power handling capability is compatible with networking, telecom and other sensitive electronic applications. Includes 6 UPS supported outlets with a single outlet load bank that can be individually controlled via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Includes 1 surge-only outlet for peripherals not requiring battery backup. Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Power Alert UPS monitoring and unattended shutdown software is available for download. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency situation. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme. From the Manufacturer Product Description Ideal for Protection of Data Center Network Rackmount Equipment Click here for a larger image Requiring only one rack space (1U) in a standard rack enclosure, Tripp Lite’s SMART500RT1U protects connected equipment against data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Featuring advanced Automatic Voltage Regulation, it provides regulated 120V nominal output without using battery power during brownouts and overvoltages. Large internal batteries support connected equipment during blackouts. The SMART500RT1U has 7 outlets (6 UPS supported, 1 surge only) including 1 outlet that is individually controllable to reboot select equipment on demand or maximize battery runtime for mission-critical equipment. USB and DB9 communication ports support messaging of detailed UPS operational parameters and line power status. Included PowerAlert UPS monitoring and unattended shutdown software provides management support for an unlimited number of network UPS systems. The SMART500RT1U comes with 250,000 Ultimate Lifetime Insurance coverage for connected equipment insurance (USA Canada only) and a 2-year product warranty. Key Features Ideal for Protection of Data Center Network Rackmount Equipment The SMART500RT1U provides advanced Automatic Voltage Regulation, reliable battery backup and comprehensive power management capability in just 1U of rack space. Featuring 7 outlets and USB DB9 ports, the SMART500RT1U offers a complete power protection solution for servers, storage devices and telecom equipment. Advanced Automatic Voltage Regulation (AVR) Advanced AVR protects connected equipment from incremental hardware damage, data loss and performance problems that can be caused by low-voltage conditions, commonly known as brownouts, and overvoltages. The SMART500RT1U corrects brownouts as low as 90V to a nominal 120V, providing safe, computer-grade power to all connected components, without consuming battery power needed to support equipment through blackouts. Runtime Chart for SMART500RT1U Click here for a larger image Reliable Battery Backup UPS battery backup keeps connected equipment operational through short power failures, and provides time to save data and perform an orderly system shutdown in case of a prolonged blackout. The SMART500RT1U features a large internal battery that provides 3 min. of battery support for a full load (300 watts) and 8 min. for a half-load (150 watts). During normal operation, incoming utility power keeps the UPS battery fully charged so that backup power will always be available if needed. Surge Suppression A sudden power surge or spike can damage or destroy electronic components and wipe out irreplaceable data. The SMART500RT1U features a 480-joule surge suppression rating to protect connected components and data from the harmful effects of power surges. EMI RFI Line Noise Filtering Various electrical and radio sources can cause disruptive interference on the AC line. This line noise is a common cause of incremental hardware damage, data corruption and audio video performance problems. The SMART500RT1U incorporates technology that filters out disruptive line noise, preventing it from affecting your equipment. Advanced Automatic Voltage Regulation with USB and DB9 Port in Just 1U of Rack Space Click here for a larger image USB DB9 Ports, SNMP Capability and Included PowerAlert Software The SMART500RT1U features a USB port and a DB9 port (cables included). Used with Tripp Lite’s included PowerAlert software, these communication ports provide comprehensive network power monitoring and control. Capabilities include automatic unattended shutdown, UPS and line power status messaging (on battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity), timed inverter shutoff after unattended shutdown, and UPS output power control for delayed or immediate reboot of connected devices. The SMART500RT1U also accepts an optional SNMP CARD accessory that enables the UPS to operate as a managed device on the network. Controllable Outlet The SMART500RT1U includes one outlet that is individually controllable via a software interface to reboot locked-up equipment or shed nonessential loads to maximize battery backup time for mission-critical equipment. Versatile Installation Options The SMART500RT1U requires only 1U of rack space in a standard 4-post rack enclosure. It can also be installed in a 2-post rack or in an upright tower configuration (mounting accessories included). Ultimate Peace of Mind The SMART500RT1U comes with 250,000 Ultimate Lifetime Insurance coverage for connected equipment (USA Canada only) and a 2-year product warranty. Technical Specifications Tripp Lite SMART500RT1U SmartPro® UPS System Voltage compatibility: 120 VAC Frequency compatibility: 50 60 Hz VA Wattage Capacity: 500 300 Battery runtimes (half full): 8 min. 3 min. Outlet quantity type: 7 x 5-15R (1 individually controllable, 1 surge only) Signal line protection: — Communications ports: 1 x USB; 1 x DB9 SNMP slot Input cord: 10 ft. Input plug: 5-15P Switches LEDs alarms: On off switch Alarm cancel self-test switch 5 LEDs Audible alarm Dimensions (HWD): 1.75 x 17.5 x 11.75 in. (1U RM) Weight: 17.6 lbs. Material of construction: Steel Agency approvals: UL 1778 (US) CSA (Canada) NOM (Mexico) FCC Part 15 Category B (EMI) RoHS Protect, Power, Organize and Control with Tripp Lite Tripp Lite UPS Systems, Power Management Accessories, Power Distribution Units, Rack Enclosures, KVM Switches and Rackmount Consoles are available with a wide range of features and options to meet the needs of any data center or networking application. SMART750RM1U SmartPro® UPS System Advanced Automatic Voltage Regulation and battery backup protection for mission-critical servers, storage devices and telecom equipment. The SMART750RM1U provides 750VA 450W power capacity with 6 outlets arranged in 2 load banks. One USB port and one DB9 port with included cables and PowerAlert monitoring software provide complete power network monitoring and control. The SMART750RM1U supports connected equipment for 24 minutes during power failures at a half load of 225 watts. 250,000 Ultimate Lifetime Insurance (USA Canada only); 2-year product warranty. SNMP CARD For Remote Monitoring and Control Allows any expansion slot-equipped Tripp Lite SmartPro or SmartOnline UPS system to operate as a managed device on the network. The SNMP CARD enables remote monitoring and control of UPS and site electrical conditions using the SNMP network management platform or a browser. It provides remote viewing of site electrical data, UPS status information and self-test logs. The SNMP CARD also supports selective rebooting of locked network equipment without disrupting power to other devices when used with customized load management receptacles available on select Tripp Lite UPS systems. SR25UB SmartRack™ Enclosure Premium 25U rack enclosure with doors and side panels. The SR25UB features locking, removable, reversible front and rear doors; locking, removable side panels keyed alike with doors; 4 interior vertical posts with unthreaded square-hole openings; preinstalled casters and leveling feet; and 3000-lb. stationary 2250-lb. rolling load capacity. The SR25UB ships fully assembled and comes with a 5-year repair replacement warranty. A full range of rackmount accessories is also available. PDUMH15ATNET Power Distribution Unit Switched metered 1U rackmount PDU with integrated automatic transfer switching (ATS). The PDUMH15ATNET provides 15A 120V capacity with 8 NEMA 5-15R outlets; sequential outlet power-on capability to prevent inrush-related equipment interaction on startup, programmable or real-time monitoring and outlet power control via secure network interface, and ATS to provide power from a secondary input source when primary input fails. 2-year product warranty. B020-008-17 Rack Console KVM Switch Controls an entire network in just 1U of rack space. The B020-008-17 combines a keyboard, 17-in. LCD screen, touch pad, numeric keypad, and 8-port KVM switch in a 1U slide-out unit. It is USB or PS 2 compatible with appropriate Tripp Lite KVM cable kits and capable of controlling up to 504 servers by daisy-chaining additional KVMs. B021-000-19 Rackmount Console Provides a complete network control system in just 1U of rack space. The B021-000-19 includes a keyboard, 19-in. LCD screen and touch pad in a 1U slide-out unit, and is compatible with any KVM switch or server equipped with PS 2 connectors.
1.- Tiempo de entrega de 3 a 5 días Hábiles.
2.- Enviamos su compra a cualquier parte del país.
.
.
***** TITULO COMPLETO *****
.
TRIPP LITE DisplayPort 4 adaptador de cable 500 VA.
***** DESCRIPCIÓN DEL PRODUCTO *****
.
500VA line-interactive 1U rack tower UPS. Installed depth of only 11.8 inches. USB, RS232, EPO and optional SNMP card 7 NEMA 5-15R outlets 6 UPS & 1 surge-only, 1 outlet is individually controllable for load shedding Supports Watchdog application, OS and hard-reboot restart options for remote applications Included PowerAlert software for complete network power management and control Advanced Automatic Voltage Regulation AVR corrects brownouts without draining battery Runtimes of 14.6 minutes at half load 250VA 150 watts and 3.2 minutes at full load(500VA 300 watts) 2-Year Warranty (3-Year with registration) & 250,000 Ultimate Lifetime Insurance for connected equipment . Más información del producto Ampliar Leer más Ampliar Key Specifications: Model: SMART500RT1U Load Capacity: 500 VA (300 W) Nominal AC Input: 120V, 60 Hz Nominal AC Output: 120V, 60 Hz AC Outlets: 7 x 5-15R Switched Outlet Banks: One switchable single-outlet 5-15R load bank Output Waveform (AC Mode): Sine Wave Output Waveform (Battery Mode): PWM Sine Wave Input Cord: 10 ft. (3 m) Cord with 5-15P Plug Half-Load Runtime: 14.6 min. (150 W Load) SmartPro Line-Interactive Rack Tower UPS with Network Slot This line-interactive UPS system protects your critical network systems from damage, downtime and data loss. Sine wave output improves compatibility with sensitive equipment Battery backup powers critical systems during outages Advanced AVR corrects power sags (brownouts) and overvoltages Surge protection blocks harmful transient voltages LED indicators signal power, voltage correction, load level and battery charge state Pre-installed network card provides Java- , HTML5-based remote management USB and serial ports connect to computers for power management Leer más Ampliar Ampliar Ampliar Ampliar Power Protection and Battery Backup Between severe weather, the aging electrical grid and unavoidable hazards lurking inside your own walls, your servers and network hardware are under constant attack from power problems. Even a brief loss of power or a momentary surge can damage your equipment, corrupt your data, bring down your network and hurt your bottom line. Prevent damage, downtime and data loss by installing this SmartPro UPS system. It conditions incoming AC power to protect your equipment, provides enough battery backup to outlast most outages and allows critical systems to shut down gracefully to prevent data loss and corruption during extended blackouts. Common Applications Protect Servers and Network Hardware: Application Servers, Storage Servers, Database Servers, File Servers, Virtualization Servers, Proxy Servers, Servers, Media Servers, VoIP Servers, Network-Attached Storage, Network Switches, PoE Switches, Firewalls, Network Appliances, Bridges, Gateways, Routers. Reliable Battery Backup Half-Load Runtime: This UPS system will support a 50% load (150 W) for up to 14.6 minutes. Hot-Swappable Batteries: The internal batteries can be replaced without turning off the UPS system and disrupting the operation of connected equipment. AVR and Surge Noise Protection In locations with chronic voltage problems, frequent switching to battery drains reserve power and shortens battery life. This UPS system has a feature ed automatic voltage regulation (AVR) that solves the problem. The UPS detects when input voltage is out of bounds and corrects it without using the battery. All Tripp Lite UPS systems also include built-in surge protection and noise filtering to shield your equipment from destructive transient voltages and electromagnetic (EMI RFI) line noise. Leer más Ampliar Ampliar Ampliar Ampliar Flexible Management Options There are several ways to manage this UPS system: 1. Use the front-panel LEDs for convenient local management. 2. Use the USB port with your computer's built-in power management features. 3. Use the USB or serial port with your computer and Tripp Lite's PowerAlert software. 4. Install an optional network card to enable standalone network management via SNMP, , SSH or telnet. LED Control Panel The intuitive multicolor LEDs display a variety of helpful and important information, including power status, voltage regulation status, connected load level, battery charge level and battery condition. Environmentally Responsible Design - High Efficiency: This UPS system saves energy, produces less heat, shrinks your carbon footprint and reduces annual operating costs. - User-Replaceable Battery: This UPS system has a user-replaceable, recyclable battery, allowing it to remain in service instead of going to a landfill. - RoHS Compliance: This UPS system complies with the RoHS (Restriction of Hazardous Substances) Directive, limiting the use of hazardous substances in manufacturing. Service and Support - 3-Year Product Warranty: If this UPS system (including the internal battery) proves defective in material or workmanship within that period, Tripp Lite will repair or replace it at no charge. - 250,000 Insurance: Tripp Lite will repair or replace connected equipment damaged by surges even lightning strikes! - Tech Support: Chicago-based, in-house tech specialists are available by phone, and chat. Leer más Ampliar Why Choose Tripp Lite? Industry Leader - Over 90 Years: Founded in 1922, Tripp Lite has a long-established and proven track record of providing reliable products and responsive customer service. - Trusted Name: From the smallest office to the largest data center, customers worldwide trust Tripp Lite to power, protect, manage and connect valuable IT equipment. - Third-Party Safety Testing and ISO 9001 Certification. Leer más . Descripción del producto Estilo:500 VA Product Description Tripp Lite's SMART500RT1U intelligent, line-interactive rack tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large internal batteries offer 14. 6 minutes half load runtime and 3. 2 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts as low as 90V. 500VA 300 watt power handling capability is compatible with networking, telecom and other sensitive electronic applications. Includes 6 UPS supported outlets with a single outlet load bank that can be individually controlled via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Includes 1 surge-only outlet for peripherals not requiring battery backup. Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Power Alert UPS monitoring and unattended shutdown software is available for download. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency situation. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme. From the Manufacturer Product Description Ideal for Protection of Data Center Network Rackmount Equipment Click here for a larger image Requiring only one rack space (1U) in a standard rack enclosure, Tripp Lite’s SMART500RT1U protects connected equipment against data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Featuring advanced Automatic Voltage Regulation, it provides regulated 120V nominal output without using battery power during brownouts and overvoltages. Large internal batteries support connected equipment during blackouts. The SMART500RT1U has 7 outlets (6 UPS supported, 1 surge only) including 1 outlet that is individually controllable to reboot select equipment on demand or maximize battery runtime for mission-critical equipment. USB and DB9 communication ports support messaging of detailed UPS operational parameters and line power status. Included PowerAlert UPS monitoring and unattended shutdown software provides management support for an unlimited number of network UPS systems. The SMART500RT1U comes with 250,000 Ultimate Lifetime Insurance coverage for connected equipment insurance (USA Canada only) and a 2-year product warranty. Key Features Ideal for Protection of Data Center Network Rackmount Equipment The SMART500RT1U provides advanced Automatic Voltage Regulation, reliable battery backup and comprehensive power management capability in just 1U of rack space. Featuring 7 outlets and USB DB9 ports, the SMART500RT1U offers a complete power protection solution for servers, storage devices and telecom equipment. Advanced Automatic Voltage Regulation (AVR) Advanced AVR protects connected equipment from incremental hardware damage, data loss and performance problems that can be caused by low-voltage conditions, commonly known as brownouts, and overvoltages. The SMART500RT1U corrects brownouts as low as 90V to a nominal 120V, providing safe, computer-grade power to all connected components, without consuming battery power needed to support equipment through blackouts. Runtime Chart for SMART500RT1U Click here for a larger image Reliable Battery Backup UPS battery backup keeps connected equipment operational through short power failures, and provides time to save data and perform an orderly system shutdown in case of a prolonged blackout. The SMART500RT1U features a large internal battery that provides 3 min. of battery support for a full load (300 watts) and 8 min. for a half-load (150 watts). During normal operation, incoming utility power keeps the UPS battery fully charged so that backup power will always be available if needed. Surge Suppression A sudden power surge or spike can damage or destroy electronic components and wipe out irreplaceable data. The SMART500RT1U features a 480-joule surge suppression rating to protect connected components and data from the harmful effects of power surges. EMI RFI Line Noise Filtering Various electrical and radio sources can cause disruptive interference on the AC line. This line noise is a common cause of incremental hardware damage, data corruption and audio video performance problems. The SMART500RT1U incorporates technology that filters out disruptive line noise, preventing it from affecting your equipment. Advanced Automatic Voltage Regulation with USB and DB9 Port in Just 1U of Rack Space Click here for a larger image USB DB9 Ports, SNMP Capability and Included PowerAlert Software The SMART500RT1U features a USB port and a DB9 port (cables included). Used with Tripp Lite’s included PowerAlert software, these communication ports provide comprehensive network power monitoring and control. Capabilities include automatic unattended shutdown, UPS and line power status messaging (on battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity), timed inverter shutoff after unattended shutdown, and UPS output power control for delayed or immediate reboot of connected devices. The SMART500RT1U also accepts an optional SNMP CARD accessory that enables the UPS to operate as a managed device on the network. Controllable Outlet The SMART500RT1U includes one outlet that is individually controllable via a software interface to reboot locked-up equipment or shed nonessential loads to maximize battery backup time for mission-critical equipment. Versatile Installation Options The SMART500RT1U requires only 1U of rack space in a standard 4-post rack enclosure. It can also be installed in a 2-post rack or in an upright tower configuration (mounting accessories included). Ultimate Peace of Mind The SMART500RT1U comes with 250,000 Ultimate Lifetime Insurance coverage for connected equipment (USA Canada only) and a 2-year product warranty. Technical Specifications Tripp Lite SMART500RT1U SmartPro® UPS System Voltage compatibility: 120 VAC Frequency compatibility: 50 60 Hz VA Wattage Capacity: 500 300 Battery runtimes (half full): 8 min. 3 min. Outlet quantity type: 7 x 5-15R (1 individually controllable, 1 surge only) Signal line protection: — Communications ports: 1 x USB; 1 x DB9 SNMP slot Input cord: 10 ft. Input plug: 5-15P Switches LEDs alarms: On off switch Alarm cancel self-test switch 5 LEDs Audible alarm Dimensions (HWD): 1.75 x 17.5 x 11.75 in. (1U RM) Weight: 17.6 lbs. Material of construction: Steel Agency approvals: UL 1778 (US) CSA (Canada) NOM (Mexico) FCC Part 15 Category B (EMI) RoHS Protect, Power, Organize and Control with Tripp Lite Tripp Lite UPS Systems, Power Management Accessories, Power Distribution Units, Rack Enclosures, KVM Switches and Rackmount Consoles are available with a wide range of features and options to meet the needs of any data center or networking application. SMART750RM1U SmartPro® UPS System Advanced Automatic Voltage Regulation and battery backup protection for mission-critical servers, storage devices and telecom equipment. The SMART750RM1U provides 750VA 450W power capacity with 6 outlets arranged in 2 load banks. One USB port and one DB9 port with included cables and PowerAlert monitoring software provide complete power network monitoring and control. The SMART750RM1U supports connected equipment for 24 minutes during power failures at a half load of 225 watts. 250,000 Ultimate Lifetime Insurance (USA Canada only); 2-year product warranty. SNMP CARD For Remote Monitoring and Control Allows any expansion slot-equipped Tripp Lite SmartPro or SmartOnline UPS system to operate as a managed device on the network. The SNMP CARD enables remote monitoring and control of UPS and site electrical conditions using the SNMP network management platform or a browser. It provides remote viewing of site electrical data, UPS status information and self-test logs. The SNMP CARD also supports selective rebooting of locked network equipment without disrupting power to other devices when used with customized load management receptacles available on select Tripp Lite UPS systems. SR25UB SmartRack™ Enclosure Premium 25U rack enclosure with doors and side panels. The SR25UB features locking, removable, reversible front and rear doors; locking, removable side panels keyed alike with doors; 4 interior vertical posts with unthreaded square-hole openings; preinstalled casters and leveling feet; and 3000-lb. stationary 2250-lb. rolling load capacity. The SR25UB ships fully assembled and comes with a 5-year repair replacement warranty. A full range of rackmount accessories is also available. PDUMH15ATNET Power Distribution Unit Switched metered 1U rackmount PDU with integrated automatic transfer switching (ATS). The PDUMH15ATNET provides 15A 120V capacity with 8 NEMA 5-15R outlets; sequential outlet power-on capability to prevent inrush-related equipment interaction on startup, programmable or real-time monitoring and outlet power control via secure network interface, and ATS to provide power from a secondary input source when primary input fails. 2-year product warranty. B020-008-17 Rack Console KVM Switch Controls an entire network in just 1U of rack space. The B020-008-17 combines a keyboard, 17-in. LCD screen, touch pad, numeric keypad, and 8-port KVM switch in a 1U slide-out unit. It is USB or PS 2 compatible with appropriate Tripp Lite KVM cable kits and capable of controlling up to 504 servers by daisy-chaining additional KVMs. B021-000-19 Rackmount Console Provides a complete network control system in just 1U of rack space. The B021-000-19 includes a keyboard, 19-in. LCD screen and touch pad in a 1U slide-out unit, and is compatible with any KVM switch or server equipped with PS 2 connectors. . Información de producto Estilo:500 VA Dimensiones del producto 22 x 15.5 x 4.9 pulgadas Peso del producto 17.64 pounds Peso del envío 19.65 pounds (Ver tarifas y políticas de envío) Fabricante Petra ASIN B0002CUA6K Asesoramiento sobre envío Este artículo debe enviarse por separado de otros artículos en tu pedido. No se aplicarán cargos adicionales por envío. California residents Haz clic aquí para ver la advertencia de la Proposición 65 Click here for Proposition 65 warning Número de modelo del producto SMART500RT1U Pilas 1 12V (Tipo de pila necesaria) Opinión media de los clientes 4.1 de 5 estrellas 45 calificaciones 4.1 de 5 estrellas Clasificación en los más vendidos de Amazon nº54 en Equipo de Alimentación Ininterrumpida (UPS) Fecha de disponibilidad en Amazon septiembre 13, 2007 Especificación técnica Specification Sheet [pdf ] User Manual [pdf ] Warranty [pdf ] Garantía y asistencia For warranty information about this product, please click here [PDF ] Comentarios Si vendes este producto, ¿te gustaría sugerir actualizaciones mediante el soporte al vendedor? ¿Quieres informarnos sobre un precio más bajo? . Estilo:500 VA Product Description Tripp Lite's SMART500RT1U intelligent, line-interactive rack tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large internal batteries offer 14. 6 minutes half load runtime and 3. 2 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts as low as 90V. 500VA 300 watt power handling capability is compatible with networking, telecom and other sensitive electronic applications. Includes 6 UPS supported outlets with a single outlet load bank that can be individually controlled via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Includes 1 surge-only outlet for peripherals not requiring battery backup. Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Power Alert UPS monitoring and unattended shutdown software is available for download. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency situation. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme. From the Manufacturer Product Description Ideal for Protection of Data Center Network Rackmount Equipment Click here for a larger image Requiring only one rack space (1U) in a standard rack enclosure, Tripp Lite’s SMART500RT1U protects connected equipment against data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Featuring advanced Automatic Voltage Regulation, it provides regulated 120V nominal output without using battery power during brownouts and overvoltages. Large internal batteries support connected equipment during blackouts. The SMART500RT1U has 7 outlets (6 UPS supported, 1 surge only) including 1 outlet that is individually controllable to reboot select equipment on demand or maximize battery runtime for mission-critical equipment. USB and DB9 communication ports support messaging of detailed UPS operational parameters and line power status. Included PowerAlert UPS monitoring and unattended shutdown software provides management support for an unlimited number of network UPS systems. The SMART500RT1U comes with 250,000 Ultimate Lifetime Insurance coverage for connected equipment insurance (USA Canada only) and a 2-year product warranty. Key Features Ideal for Protection of Data Center Network Rackmount Equipment The SMART500RT1U provides advanced Automatic Voltage Regulation, reliable battery backup and comprehensive power management capability in just 1U of rack space. Featuring 7 outlets and USB DB9 ports, the SMART500RT1U offers a complete power protection solution for servers, storage devices and telecom equipment. Advanced Automatic Voltage Regulation (AVR) Advanced AVR protects connected equipment from incremental hardware damage, data loss and performance problems that can be caused by low-voltage conditions, commonly known as brownouts, and overvoltages. The SMART500RT1U corrects brownouts as low as 90V to a nominal 120V, providing safe, computer-grade power to all connected components, without consuming battery power needed to support equipment through blackouts. Runtime Chart for SMART500RT1U Click here for a larger image Reliable Battery Backup UPS battery backup keeps connected equipment operational through short power failures, and provides time to save data and perform an orderly system shutdown in case of a prolonged blackout. The SMART500RT1U features a large internal battery that provides 3 min. of battery support for a full load (300 watts) and 8 min. for a half-load (150 watts). During normal operation, incoming utility power keeps the UPS battery fully charged so that backup power will always be available if needed. Surge Suppression A sudden power surge or spike can damage or destroy electronic components and wipe out irreplaceable data. The SMART500RT1U features a 480-joule surge suppression rating to protect connected components and data from the harmful effects of power surges. EMI RFI Line Noise Filtering Various electrical and radio sources can cause disruptive interference on the AC line. This line noise is a common cause of incremental hardware damage, data corruption and audio video performance problems. The SMART500RT1U incorporates technology that filters out disruptive line noise, preventing it from affecting your equipment. Advanced Automatic Voltage Regulation with USB and DB9 Port in Just 1U of Rack Space Click here for a larger image USB DB9 Ports, SNMP Capability and Included PowerAlert Software The SMART500RT1U features a USB port and a DB9 port (cables included). Used with Tripp Lite’s included PowerAlert software, these communication ports provide comprehensive network power monitoring and control. Capabilities include automatic unattended shutdown, UPS and line power status messaging (on battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity), timed inverter shutoff after unattended shutdown, and UPS output power control for delayed or immediate reboot of connected devices. The SMART500RT1U also accepts an optional SNMP CARD accessory that enables the UPS to operate as a managed device on the network. Controllable Outlet The SMART500RT1U includes one outlet that is individually controllable via a software interface to reboot locked-up equipment or shed nonessential loads to maximize battery backup time for mission-critical equipment. Versatile Installation Options The SMART500RT1U requires only 1U of rack space in a standard 4-post rack enclosure. It can also be installed in a 2-post rack or in an upright tower configuration (mounting accessories included). Ultimate Peace of Mind The SMART500RT1U comes with 250,000 Ultimate Lifetime Insurance coverage for connected equipment (USA Canada only) and a 2-year product warranty. Technical Specifications Tripp Lite SMART500RT1U SmartPro® UPS System Voltage compatibility: 120 VAC Frequency compatibility: 50 60 Hz VA Wattage Capacity: 500 300 Battery runtimes (half full): 8 min. 3 min. Outlet quantity type: 7 x 5-15R (1 individually controllable, 1 surge only) Signal line protection: — Communications ports: 1 x USB; 1 x DB9 SNMP slot Input cord: 10 ft. Input plug: 5-15P Switches LEDs alarms: On off switch Alarm cancel self-test switch 5 LEDs Audible alarm Dimensions (HWD): 1.75 x 17.5 x 11.75 in. (1U RM) Weight: 17.6 lbs. Material of construction: Steel Agency approvals: UL 1778 (US) CSA (Canada) NOM (Mexico) FCC Part 15 Category B (EMI) RoHS Protect, Power, Organize and Control with Tripp Lite Tripp Lite UPS Systems, Power Management Accessories, Power Distribution Units, Rack Enclosures, KVM Switches and Rackmount Consoles are available with a wide range of features and options to meet the needs of any data center or networking application. SMART750RM1U SmartPro® UPS System Advanced Automatic Voltage Regulation and battery backup protection for mission-critical servers, storage devices and telecom equipment. The SMART750RM1U provides 750VA 450W power capacity with 6 outlets arranged in 2 load banks. One USB port and one DB9 port with included cables and PowerAlert monitoring software provide complete power network monitoring and control. The SMART750RM1U supports connected equipment for 24 minutes during power failures at a half load of 225 watts. 250,000 Ultimate Lifetime Insurance (USA Canada only); 2-year product warranty. SNMP CARD For Remote Monitoring and Control Allows any expansion slot-equipped Tripp Lite SmartPro or SmartOnline UPS system to operate as a managed device on the network. The SNMP CARD enables remote monitoring and control of UPS and site electrical conditions using the SNMP network management platform or a browser. It provides remote viewing of site electrical data, UPS status information and self-test logs. The SNMP CARD also supports selective rebooting of locked network equipment without disrupting power to other devices when used with customized load management receptacles available on select Tripp Lite UPS systems. SR25UB SmartRack™ Enclosure Premium 25U rack enclosure with doors and side panels. The SR25UB features locking, removable, reversible front and rear doors; locking, removable side panels keyed alike with doors; 4 interior vertical posts with unthreaded square-hole openings; preinstalled casters and leveling feet; and 3000-lb. stationary 2250-lb. rolling load capacity. The SR25UB ships fully assembled and comes with a 5-year repair replacement warranty. A full range of rackmount accessories is also available. PDUMH15ATNET Power Distribution Unit Switched metered 1U rackmount PDU with integrated automatic transfer switching (ATS). The PDUMH15ATNET provides 15A 120V capacity with 8 NEMA 5-15R outlets; sequential outlet power-on capability to prevent inrush-related equipment interaction on startup, programmable or real-time monitoring and outlet power control via secure network interface, and ATS to provide power from a secondary input source when primary input fails. 2-year product warranty. B020-008-17 Rack Console KVM Switch Controls an entire network in just 1U of rack space. The B020-008-17 combines a keyboard, 17-in. LCD screen, touch pad, numeric keypad, and 8-port KVM switch in a 1U slide-out unit. It is USB or PS 2 compatible with appropriate Tripp Lite KVM cable kits and capable of controlling up to 504 servers by daisy-chaining additional KVMs. B021-000-19 Rackmount Console Provides a complete network control system in just 1U of rack space. The B021-000-19 includes a keyboard, 19-in. LCD screen and touch pad in a 1U slide-out unit, and is compatible with any KVM switch or server equipped with PS 2 connectors.