Cartucho de filtro Pentek Serie NCP plisada impregnada de carbono, 10 micras, 1

***** CONDICIONES PARA LA VENTA *****
1.- Tiempo de entrega de 3 a 5 días Hábiles.
2.- Enviamos su compra a cualquier parte del país.
.
.
***** TITULO COMPLETO *****
.
Cartucho de filtro Pentek Serie NCP plisada impregnada de carbono, 10 micras, 1.
***** DESCRIPCIÓN DEL PRODUCTO *****
.
Esto se ajusta a tu . Asegúrate de que esto coincide al ingresar tu número de modelo. Reduce el sabor y olor de sedimentos y cloro en residencial y municipales agua potable Nominal Filtración índice de 10 micras carbon-impregnated poliéster media con pliegues alrededor de un núcleo de polipropileno para mayor resistencia y resistencia a las bacterias inicial caída de presión de 2 psi a una tasa de flujo de 8 GPM Rango de temperatura de 40 a 125 grados F (4,4 a 51,7 grados C) . null . Descripción del producto This Pentek NCP-20 pleated carbon-impregnated polyester filter cartridge reduces sediment and chlorine taste and odor in residential and municipal drinking water. It has a nominal filtration rating of 10 microns at an efficiency of 85%. The filter will reduce available chlorine (FAC) at 2 parts per million (ppm) by at least 50% in up to 1,000 gallons at a flow rate of 4 gallons per minute (gpm). The cartridge is made of carbon-impregnated polyester media pleated around a rigid polypropylene core with plastisol end caps for strength and resistance to bacteria. It has an initial pressure drop of 1 pound per square inch (psi) at a recommended flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge is for use in rural, residential, and municipal drinking water purification.SpecificationsNominal filtration rating10 micronsInitial pressure drop at 10 gpm1 psiChlorine reduction capacity1,000 gallons at 4 gpmTemperature range40 to 125 degrees F (4.4 to 51.7 degrees C)Maximum dimensions (H x W)20 x 2-1 2 inches (508 x 114 mm) The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 50%.H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typi y consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance. . null