Elegoo placa nano CH340 ATmega328P con cable USB, compatible con Arduino Nano V3.0
- Product Code: 1569390968-1614
- Availability: In Stock
-
$ 0.00
***** CONDICIONES PARA LA VENTA *****
1.- Tiempo de entrega de 3 a 5 días Hábiles.
2.- Enviamos su compra a cualquier parte del país.
.
.
***** TITULO COMPLETO *****
.
Elegoo placa nano CH340 ATmega328P con cable USB, compatible con Arduino Nano V3.0.
***** DESCRIPCIÓN DEL PRODUCTO *****
.
Esto se ajusta a tu . Asegúrate de que esto coincide al ingresar tu número de modelo. You could download the driver of Elegoo Nano V3.0 at: bit.ly 2jKlJMO The Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link. It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila Duemilanove has (electri y) with more analog input pins and onboard +5V AREF jumper. Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automati y selected to the highest voltage source. . Descripción del producto The Elegoo Nano Board is a small, complete, and breadboard-friendly board based on the ATmega328P and it works with a mini USB cable. The Elegoo Nano can be powered via USB connection, 6-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The Elegoo Nano has a variety of facilities for communicating with a PC or other microcontrollers. Elegoo Nano Board Nice Boards, Nice Cost Windows driver installation is easy. Power consumption is low. The header pins haven't been soldered. Leer más Input and Output Each of the 14 digital pins on the Nano can be used as an input or output, using pinMode(), digitalWrite(), and digitalRead() functions. Some pins have specialized functions: Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins of the CH340G USB chip. Leer más Classic LED Project with Nano Board This example project shows the simplest thing you can do with an Elegoo Nano to see physical output: it blinks the on-board LED just like the star in the sky. Hardware needed for this project: 1 x Nano Board 1 x Mini USB Cable 1 x Breadboard 2 x Wires Leer más The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the official Arduino Genuino UNO, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. You could download the driver of Elegoo Nano V3.0 from ELEGOO official sit. ATTENTION: We dont have USB cables in this kit and you will need to buy a mini USB cable to use this NANO board. Package Include : 3 X Nano Board PCB Size: 18 x 45 mm Weight: 7 g Technical specs: Microcontroller: ATmega328;Architecture: AVR Operating Voltage: 5 V; Flash Memory: 32 KB of which 2 KB used by bootloader SRAM: 2 KB; EEPROM: 1 KB Clock Speed: 16 MHz;Analog I O Pins: 8 DC Current per I O Pins: 40 mA (I O Pins) Input Voltage: 7-12 V; Power Consumption: 19 mA PWM Output: 6; Digital I O Pins: 22 Leer más ELEGOO UNO Project Smart Robot Car Kit V 3.0 with Tutorial based on Arduino ELEGOO Tumbller Self-Blancing Robot Car Kit Compatible with Arduino ELEGOO Robotic Mini Car Kit Based on Arduino Platform Elegoo UNO R3 Project Complete Starter Kit with Tutorial for Arduino (63 Items) Elegoo Mega 2560 Project The Most Complete Starter Kit w Tutorial for Arduino Elegoo UNO Project Super Starter Kit with Tutorial for Arduino Controller Board UNO R3 NANO NANO UNO R3 MEGA 2560 UNO R3 Arduino Compatible ? ? ? ? ? ? . null . Información de producto Color:Nano 3.0 x 3 without cable Dimensiones del producto 1.9 x 0.4 x 0.7 pulgadas Peso del producto 0.16 onzas Peso del envío 1.6 onzas (Ver tarifas y políticas de envío) Fabricante ELEGOO ASIN B0713XK923 Número de modelo del producto EL-CB-005 Opinión media de los clientes 4.1 de 5 estrellas 283 calificaciones 4.1 de 5 estrellas Clasificación en los más vendidos de nº204 en Componentes Internos de la Computadora Fecha de disponibilidad en mayo 3, 2017 Comentarios Si vendes este producto, ¿te gustaría sugerir actualizaciones mediante el soporte al vendedor? ¿Quieres informarnos sobre un precio más bajo? . null
1.- Tiempo de entrega de 3 a 5 días Hábiles.
2.- Enviamos su compra a cualquier parte del país.
.
.
***** TITULO COMPLETO *****
.
Elegoo placa nano CH340 ATmega328P con cable USB, compatible con Arduino Nano V3.0.
***** DESCRIPCIÓN DEL PRODUCTO *****
.
Esto se ajusta a tu . Asegúrate de que esto coincide al ingresar tu número de modelo. You could download the driver of Elegoo Nano V3.0 at: bit.ly 2jKlJMO The Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link. It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila Duemilanove has (electri y) with more analog input pins and onboard +5V AREF jumper. Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automati y selected to the highest voltage source. . Descripción del producto The Elegoo Nano Board is a small, complete, and breadboard-friendly board based on the ATmega328P and it works with a mini USB cable. The Elegoo Nano can be powered via USB connection, 6-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The Elegoo Nano has a variety of facilities for communicating with a PC or other microcontrollers. Elegoo Nano Board Nice Boards, Nice Cost Windows driver installation is easy. Power consumption is low. The header pins haven't been soldered. Leer más Input and Output Each of the 14 digital pins on the Nano can be used as an input or output, using pinMode(), digitalWrite(), and digitalRead() functions. Some pins have specialized functions: Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins of the CH340G USB chip. Leer más Classic LED Project with Nano Board This example project shows the simplest thing you can do with an Elegoo Nano to see physical output: it blinks the on-board LED just like the star in the sky. Hardware needed for this project: 1 x Nano Board 1 x Mini USB Cable 1 x Breadboard 2 x Wires Leer más The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the official Arduino Genuino UNO, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. You could download the driver of Elegoo Nano V3.0 from ELEGOO official sit. ATTENTION: We dont have USB cables in this kit and you will need to buy a mini USB cable to use this NANO board. Package Include : 3 X Nano Board PCB Size: 18 x 45 mm Weight: 7 g Technical specs: Microcontroller: ATmega328;Architecture: AVR Operating Voltage: 5 V; Flash Memory: 32 KB of which 2 KB used by bootloader SRAM: 2 KB; EEPROM: 1 KB Clock Speed: 16 MHz;Analog I O Pins: 8 DC Current per I O Pins: 40 mA (I O Pins) Input Voltage: 7-12 V; Power Consumption: 19 mA PWM Output: 6; Digital I O Pins: 22 Leer más ELEGOO UNO Project Smart Robot Car Kit V 3.0 with Tutorial based on Arduino ELEGOO Tumbller Self-Blancing Robot Car Kit Compatible with Arduino ELEGOO Robotic Mini Car Kit Based on Arduino Platform Elegoo UNO R3 Project Complete Starter Kit with Tutorial for Arduino (63 Items) Elegoo Mega 2560 Project The Most Complete Starter Kit w Tutorial for Arduino Elegoo UNO Project Super Starter Kit with Tutorial for Arduino Controller Board UNO R3 NANO NANO UNO R3 MEGA 2560 UNO R3 Arduino Compatible ? ? ? ? ? ? . null . Información de producto Color:Nano 3.0 x 3 without cable Dimensiones del producto 1.9 x 0.4 x 0.7 pulgadas Peso del producto 0.16 onzas Peso del envío 1.6 onzas (Ver tarifas y políticas de envío) Fabricante ELEGOO ASIN B0713XK923 Número de modelo del producto EL-CB-005 Opinión media de los clientes 4.1 de 5 estrellas 283 calificaciones 4.1 de 5 estrellas Clasificación en los más vendidos de nº204 en Componentes Internos de la Computadora Fecha de disponibilidad en mayo 3, 2017 Comentarios Si vendes este producto, ¿te gustaría sugerir actualizaciones mediante el soporte al vendedor? ¿Quieres informarnos sobre un precio más bajo? . null